Eemax ED150480T12 DS Series Twelve Electric Tankless Water Heater
This unit features twelve powerful heating modules. Fitted with 1-1/4" NPT bottom pipe connections; minimum operating pressure 40 PSI (maximum 150 PSI); recommended for emergency drench showers to comply with ANSI Z358.1 tepid water requirements (60°F-95°F) 25 GPM. Industrial/commercial applications. Equipped with micro processing thermostats.
Eemax ED150480T12 DS Series Twelve Electric Tankless Water Heater Applications:
Eye/Face Combo Drench shower
Emergency Drench shower
Capacity 3 GPM (first stage/EFD Combo) to 30 GPM (138 and 150 kW units only)
Meets ANSI Z358.1 "tepid" water requirements for emergency eye/face wash. (Minimum flow 4 GPM)
"Tepid" water (60° to 95°) range
Boosters to 180°
Eemax ED150480T12 DSSeries Twelve Electric Tankless Water Heater Features:
Unlimited On Demand Hot Water - no delay
Save Water – Install at specific location
Meets ANSI Z358.1 Tepid Water Requirements
Sophisticated Thermostatic Control continuously monitors outlet temperature and adjust output for variations in flow and pressure.
Eliminate Costly Mixing Valves.
Easy Installation - only cold water supply needed - unit equipped with 1-1/4" NPT fitting
Reduced Installation Material Cost - no T&P relief needed (check local codes)
Micro Processor Technology - accurately maintains outlet temperature (+/- 1 degree F)
Prevents legionella, micro bacterial growth
Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss) - 99% efficient.
Field Serviceable Elements
Heater designed to fail to cold supply on electrical failure.
Eemax ED150480T12 DS Series Twelve Electric Tankless Water Heater Specifications:
Dimensions - 32-3/32" x 32-3/32" x 6"
Weight - 70 lbs
kW - 150.0 kW
Eemax 480V Three Phase Delta Configuration Requires: 3 Lives, 1 Ground (earth)
Recommended Wire: 250 MCM
Drench shower only- Temperature rise at:
20 GPM - 51°F
23 GPM - 45°F
26 GPM - 39°F
30 GPM - 34°F
Color - Yellow
Element - 12 replaceable cartridge elements plus two spares
Pipe-Fittings - 1-1/4" NPT fitting at bottom
The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.
Note: All of these Eemax units are custom made to order and as such are, nonreturnable and nonrefundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.
Activation Turn On :
DS= For drench shower only.
(minimum turn on: 12 GPM)
Nema 4= Waterproof enclosure 42"x36"x12", panel 42"x34.2"