Eemax ED096480T12 EFD Series Twelve Electric Tankless Water Heater
This unit features twelve powerful heating modules. Fitted with 1-1/4" NPT bottom pipe connections; minimum operating pressure 40 PSI (maximum 150 PSI); recommended for emergency drench showers to comply with ANSI Z358.1 tepid water requirements (65°F-90°F) 26 GPM. Industrial/commercial applications. Equipped with micro processing thermostats.
Eemax ED096480T12 EFD Series Twelve Electric Tankless Water Heater Applications:
Eye/Face Combo Drench shower
Emergency Drench shower
Capacity 3 GPM (first stage/EFD Combo) to 26 GPM
Meets ANSI Z358.1 "tepid" water requirements for emergency eye/face wash. (Minimum flow 3 GPM)
"Tepid" water (65° to 90°) range
Boosters to 180°
Eemax ED096480T12 EFD Series Twelve Electric Tankless Water Heater Features:Cut Energy Waste Flow switch activates heater only on demand (no standby heat loss) 99% efficient.Save Water Install at specific location.Continuous Hot Water No storage capacity to run out.Factory Set Temperature Available Range ambient to 180°F.Capacity to 26 GPMMeets ANSI Z358.1 Tepid Water Requirements.Reduced Installation Material Cost No T&P relief needed(check local codes).Microprocessor Control Ensures accurate output temperatures,standard temp of 90°F.Reduces Calcification, Liming and Sedimentation.Field Serviceable Element Replaceable cartridge element (1 year warranty).Warranty Heaters are warrantied against failure due to leaks of Heater Body/Element Assembly for a period of FIVE YEARS. One year on parts
Eemax ED09648012T EFD Series Twelve Electric Tankless Water Heater Specifications:
Dimensions - 32-3/32" x 32-3/32" x 6"
Weight - 70 lbs
kW - 96.0 kW
Eemax 480V Three Phase Delta Configuration Requires: 3 Lives, 1 Ground (earth)
Recommended Wire: 1/0 AWG
First Stage (eye/face combo) temperature rise at:
6 GPM - 54°F
7.5 GPM - 43°F
Second Stage (drench shower) temperature rise at:
20 GPM - 32°F
23 GPM- 28°F
26 GPM - 25°F
Color - Yellow
Element - 12 replaceable cartridge elements plus two spares
Pipe-Fittings - 1-1/4" NPT fitting at bottom
The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.
Note: All of these Eemax units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met.
Activation Turn On:
EFD= For combination Eye/Face drench shower
First Stage 3 GPM turn on (with reduced power for eye/face wash)
Second Stage 15 GPM turn on (full power for drench shower)
Nema 4= Waterproof enclosure 42"x36"x12", panel 42"x34.2"