Eemax EX023240TC Series Two Electric Tankless Water Heater with Thermostatic Control
This unit is ideal for serving an entire condo, apartment, smaller house or cabin. It would replace the existing tank type water heater, being fed with cold water only. Minimum switch on flow rate 0.7 GPM. Easily adjustable thermostat gives exact temperature control. Turns on in stages based on hot water demand.
Eemax EX023240TC TC Series Two Electric Tankless Water Heater with Thermostatic Control Features:
Available thermostatic control "TC" helps insure accurate outlet temperatures (±0.5°F). Hot or Cold water feed.
On Demand Hot Water - no delay.
Continuous Hot Water - no storage capacity to run out.
Reduces Installation Cost - no T & P relief valve needed (check local codes).
Easy Installation - only one cold water line need be brought to lavatory - integral 3/4" NPT fittings on bottom (no sweat connections).
Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss).
Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
Field Serviceable Elements replaceable cartridge element.
Unit must be mounted on wall.
Eemax EX023240TC Series Two Electric Tankless Water Heater with Thermostatic Control Applications:
Adjustable, Precise Temperature Setting ±0.5°F Anti-scald Protection
(TC) Only- Solar Back-up
Eemax EX023240TC Series Two Electric Tankless Water Heater with Thermostatic Control Specifications:
Dimensions 10" x 10.5" x 3"
Weight 10.5 lbs
KW 23.0 kW
Rise at 2 GPM 79°F
Rise at 2.5 GPM 62°F
Rise at 3 GPM 52°F
Wire Size AWG 6
Element - Dual replacement cartridge inserts
Connections: 3/4 NPT at bottom of unit
The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.
Note: This unit must have 2 independent electrical circuits using correctly rated wire and 2 circuit breakers.
TC=Hot or Cold Water Feed Only
ML=Multiple Lavatory (Factory preset to 110° with .3 GPM)
S=Sanitation Setting (Factory preset not to exceed 180°F)
FS=Factory Set Temp (Customer Specified)