The Eemax EX180T3 "Three Phase" Electric Tankless Water Heater
Designed for cold or hot water feed use in Commercial and Industrial applications. Used for a booster or where very accurate water temperature is required.
Eemax EX180T3 "Three Phase" Electric Tankless Water Heater Features:Cut Energy Waste– Flow switch activates heater only on demand (no standby heat loss) – 99% efficient.Save Water– Install at specific location.Continuous Hot Water– No storage capacity to run out.Factory Set Temperature Available– Range ambient to 180°F.Capacity to 5 GPMMeets ANSI Z358.1 Tepid Water Requirements.Reduced Installation Material Cost– No T&P relief needed(check local codes).Microprocessor Control– Ensures accurate output temperatures,standard temp of 140°F.Reduces Calcification, Liming and Sedimentation.Field Serviceable Element– Replaceable cartridge element (1 year warranty).Warranty– Heaters are warrantied against failure due to leaks of Heater Body/Element Assembly for a period of FIVE YEARS. One year on parts
Eemax EX180T3 "Three Phase" (Triple Module) Thermostatic Parallel Turn On
1.8 GPM turn on
Max 5 GPM
Cold or Hot Feed
208V Delta requires: 3 lives, 1 ground (earth) (no neutral)
Recommended Wire Size 6AWG
Rise at 2 GPM 61°F
Rise at 3 GPM 41°F
Rise at 4 GPM 32°F
Rise at 5 GPM 25°F
Weight 15 lbs
The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.
All Eemax Three-Phase units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met.
S- Sanitation setting 180°
FS- Factory Set temperature (Customer Specified-Not to exceed 180°F)
EE=Emergency Eyewash (meets ANSI tepid water requirements)