The Eemax EX55TDI "De-Ionized", Single Heating Module, Electric Tankless Water Heater. The Eemax Ultrapure De-ionized (DI) water heater is capable of heating water of the highest purity(up to 18 MEG OHM quality)- and affordable. Its compact design (12"x15") makes the unit particularly well suited for point of use installation to serve a single or multiple work stations. The units utilize Eemax's Instantaneous Water Heating technology, delivering continuous, constant temperature, hot water. All Eemax ultra pure water heaters utilize the highest quality materials. 316 stainless steel wetted surfaces.
Why Hot De-Ionized water? Hot "DI" water has become an attractive replacement for chlorofluorocarbons (CFC's). CFC's are ozone depleting and must be phased out of all manufacturing operations. Hot De-Ionized water provides a more aggressive cleaning agent, will flash dry quickly and is "user friendly" in terms of its disposal. Heated "DI" water has remarkable cleaning properties and will not pollute the environment.
Eemax EX55TDI "De-Ionized" Electric Tankless Water Heater Applications:
High Tolerance Component Cleaning
Spray Rinse Tank
Batch Chemical Mixing
Eemax EX55TDI "De-Ionized" Electric Tankless Water Heater Features:
Cold or Hot water feed
Capable of Heating High Purity Water- state of the art materials used in construction, rated for purity levels up to 18 MEG OHM.
Test Proven by independent analytical laboratory to maintain water purity. Test conclusion verified no measurable contamination of water passing through the Eemax heater. Test results available upon request.
Extensive Product Range- 3 kW, 120V through 32kW, three phase power available
Thermostatic Temperature Control Available- highly accurate micro processor to deliver +/- 1°F outlet accuracy.
Compact size- Largest unit is 15-1/4"x12-1/4"x4-1/4"
Eliminate Deadlegs- unique flow activated design allows for constant water movement, even when not heating.
Easy Installation- compact size, allows for installation close to point of use.
Eemax EX55TDI "De-Ionized" Single Heating Module Electric Tankless Water Heater Specifications:
Dimensions - 10-3/4" x 5-1/4" x 3"
Weight - 10lbs
KW - 5.5kW
Recommended Wire 10AWG
Rise at 0.5 GPM - 75°F
Rise at 1.0 GPM - 38°F
Rise at 2.0 GPM - 19°F
Bottom water connections, 1/2" compression fitting (type 316 stainless steel)
The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.
S=Sanitation temperature setting 180°
FS=Factory set temperature setting (ambient 180°)
P=Ambient to 100°
Priced for EX55TDI S (Sanitation setting 180°)