Eemax ED096480T12 EFD Series Twelve Electric Tankless Water Heater

This unit features twelve powerful heating modules. Fitted with 1-1/4" NPT bottom pipe connections; minimum operating pressure 40 PSI (maximum 150 PSI); recommended for emergency drench showers to comply with ANSI Z358.1 tepid water requirements (60°F-95°F) 25 GPM. Industrial/commercial applications. Equipped with micro processing thermostats.

Eemax ED096480T12 EFD Series Twelve Electric Tankless Water Heater Applications:
• Eye/Face Combo Drench shower
• Emergency Drench shower
• Commercial/Industrial
• Capacity 3 GPM (first stage/EFD Combo) to 26 GPM
• Meets ANSI Z358.1 "tepid" water requirements for emergency eye/face wash. (Minimum flow 4 GPM)
• "Tepid" water (60° to 95°) range
• Factories
• Boosters to 180°

Eemax ED096480T12 EFD Series Twelve Electric Tankless Water Heater Features:
• Unlimited On Demand Hot Water - no delay
• Save Water – Install at specific location
•Meets ANSI Z358.1 Tepid Water Requirements
• Sophisticated Thermostatic Control continuously monitors outlet temperature and adjust output for variations in flow and pressure.
• Eliminate Costly Mixing Valves.
• Easy Installation - only cold water supply needed - unit equipped with 1-1/4" NPT fitting
• Reduced Installation Material Cost - no T&P relief needed (check local codes)
• Micro Processor Technology - accurately maintains outlet temperature (+/- 1 degree F)
• Splash-proof Enclosure
• Prevents legionella, micro bacterial growth
• Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss) - 99% efficient.
• Compact Size
• Field Serviceable Elements
• Heater designed to fail to cold supply on electrical failure.

Eemax ED09648012T EFD Series Twelve Electric Tankless Water Heater Specifications:
• Dimensions - 32-3/32" x 32-3/32" x 6"
• Weight - 70 lbs
• kW - 96.0 kW
• Eemax 480V Three Phase Delta Configuration Requires: 3 Lives, 1 Ground (earth)
• 116A/Phase
• Recommended Wire: 2/0 AWG
• First Stage (eye/face combo) temperature rise at:
6 GPM - 54°F
7.5 GPM - 43°F
• Second Stage (drench shower) temperature rise at:
20 GPM - 32°F
23 GPM- 28°F
26 GPM - 25°F
• Color - Yellow
• Element - 12 replaceable cartridge elements plus two spares
• Pipe-Fittings - 1-1/4" NPT fitting at bottom

The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Note: All of these Eemax units are custom made to order and as such are, nonreturnable and nonrefundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met, especially that a neutral line is available for all 480Y/277V.

Activation Turn On Options:
EFD= For combination Eye/Face drench shower
First Stage 3 GPM turn on (with reduced power for eye/face wash)
Second Stage 15 GPM turn on (full power for drench shower)




Enclosure Option:
Nema 4= Waterproof enclosure 42"x36"x12", panel 42"x34.2"

ED096480T12 EFD