Eemax ED054480T24T Series Six Electric Tankless Water Heater
This unit features six powerful heating modules with a minimum turn on of 1 GPM and a maximum flow of 6 GPM. It is ideal for tepid water Eye/Face washes (65°-90°) and other industrial/commercial applications. Standard temperature setting is 100°-140° and equipped with micro-processing thermostats.
Eemax ED054480T24T Series Six Electric Tankless Water Heater Applications:Commercial/IndustrialCapacity 1 to 6 GPMEye/Face Combo: Tepid Water option (EF) Meets ANSI Z358.1 Tepid Water Requirements for Emergency Eye/Face wash range of (65°-90°F)Boosters applications to 180°F (S option)
Eemax ED054480T24T Series Six Electric Tankless Water Heater Features:Cut Energy Waste– Flow switch activates heater only on demand (no standby heat loss) – 99% efficient.Save Water– Install at specific location.Continuous Hot Water– No storage capacity to run out.Factory Set Temperature Available– Range ambient to 180°F.Capacity to 6 GPM.Meets ANSI Z358.1 Tepid Water Requirements.Reduced Installation Material Cost– No T&P relief needed(check local codes).Microprocessor Control– Ensures accurate output temperatures,standard temp of 140°F.Reduces Calcification, Liming and Sedimentation.Field Serviceable Element– Replaceable cartridge element (1 year warranty).Warranty– Heaters are warrantied against failure due to leaks of Heater Body/Element Assembly for a period of FIVE YEARS. One year on parts
Eemax ED054480T24T Series Six Electric Tankless Water Heater Specifications:
Dimensions - 32-3/32" x 20-3/32" x 6-3/32"
Weight - 42 lbs
Volts - 480V requires: 3 lives, 1 neutral and 1 ground (earth)
KW - 54.0kW
Rise at 4 GPM - 92°F
Rise at 5 GPM - 74°F
Rise at 6 GPM - 61°F
Recommended wire size 4 AWG
Color - Yellow
Element - Six replaceable cartridge elements plus two spares
Pipe-Fittings - 1" Male NPT fitting at bottom
The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.
Note: All of these Eemax units are custom made to order and as such are, non-returnable and non-refundable. We urge you therefore to check your electrical supply, making sure all criteria for operating your Eemax water heater are met.
Staged Turn On:
T24T=Turns on in stages, first stage 1 GPM, / maximum 6 GPM
S =Sanitation temperature setting, Factory preset not to exceed 180°
FS =Factory Set (Customer Specified) temperature setting (Not to exceed temperature ambient to 180°)
EF/Combo =Tepid water temperature setting emergency eye/face wash
Nema 4= Optional waterproof cabinet – hinged cover. Powder coated finish.
NEMA 4x =Optional stainless steel waterproof corrosion-resistant cabinet.
ED054480T24T= 480V Three Phase Delta requires: 3 lives, 1 ground (earth) -no neutral, Staged Turn On