Cart:
Store FrontAccount Store FrontBasket Contents
Eemax Thermostatic Electric Tankless Water Heater 3.0 kW 277V EX3277T


Eemax Thermostatic Electric Tankless Water Heater 3.0 kW 277V  EX3277T
    Quantity in Basket: None
    Code: EEMAX082
    Reg: $407.05
    Save : $106.96

    Select Thermostatic Option
    Standard EX3277T
    Sanitation EX3277T S - Add $13.65
    Emergency Eyewash EX3277T EE - Add $13.65
    Factory Set EX3277T FS - Add $13.65
    Multiple Lav EX3277T ML - Add $13.65
    Select Shipping
    Quantity:

    Bookmark and Share

    Eemax EX3277T "Thermostatic" Electric Tankless Water Heater

    The Eemax EX3277T is best to serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on 0.5 GPM, max 2 GPM.

    Eemax EX3277T "Thermostatic" Electric Tankless Water Heater Features:
    • Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
    • Eliminate costly mixing valves.
    • On Demand Hot Water - no delay.
    • Continuous Hot Water - no storage capacity to run out.
    • Reduces Installation Cost - no T & P relief valve needed (check local codes).
    • Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
    • Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
    • Thermostatic control reduces wide temperature fluctuation.
    • Prevents Legionella Bacteria Growth.
    • Meets ANSI Z358.1 Tepid Water Requirements.
    • Anti-scald Protection.
    • Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
    • Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
    • Compact Size - dimensions 10.75" x 5.25"x 3"
    • Weight 4 lbs.
    • Reduces calcification.
    • Space Saving Installation - under sink, point-of-use.
    • Field Serviceable Element - replaceable cartridge element.
    • Complies with handicap requirements.

    Eemax EX3277T "Thermostatic" Electric Tankless Water Heater Applications:
    • Boosters (to 180° F)
    • Metering and sensor faucet compatible
    • Low volume shower handset (.7 - 2 GPM)
    • Schools/Hospitals/Nursing Homes/Laboratories
    • Eliminate wait for hot water, long pipe runs
    • Maintains accurate temperature continuously +/- 0.5°F

    Eemax EX3277T "Thermostatic" Electric Tankless Water Heater Specifications:
    • Volts 277V
    • KW 3.0kW
    • Amps 11A
    • Rise at 0.5 GPM 41°F
    • Wire Size AWG 14
    • Dimensions 10.75" x 5.25" x 3"
    • Weight 4 lbs
    • Element - Replaceable cartridge insert
    • Connections: 1/2" compression

    Eemax EX3277T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
    • Thermostatic board maintains +/-0.5°F accuracy.
    • Achieves full, pre-selected outlet temperature within 10 seconds after activation.
    • Maintains consistent temperature


    The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

    S- Sanitation setting 180°
    FS- Factory Set temp. (Specify max temp)
    EE- Emergency Eye Wash (Tepid Water Setting)
    ML-Multiple Lavatory (Factory preset with 110°F and 0.3 GPM turn on)

    EX3277T

    Click Here For Specification
    Click Here For Detailed Information About This Products Warranty.
    Previous Previous

    Availability: Normally ships within 1-2 business days.